Changing Parameter Settings Using Simatic Pdm; Parameters Accessed Via Pull-Down Menus - Siemens Sitrans LR200 Instruction Manual

Changing parameter settings using SIMATIC PDM

Notes:
• For a complete list of parameters, see
• Clicking on Cancel during an upload from device to SIMATIC PDM will result in some
parameters being updated.
Many parameters are accessed via the 4-level menu in PDM. See
pull-down menus
1) Launch SIMATIC PDM, connect to SITRANS LR200, and upload data from the
device.
2) Adjust parameter values in the parameter value field then click on Enter. The status
fields read Changed.
3) Open the Device menu, click on Download to device, then use File – Save to save
settings offline. The status fields are cleared.

Parameters accessed via pull-down menus

Click on Device or View to open the associated pull-down menus.
Pull-down menus
See
Page 44 SITRANS LR200 (HART) – INSTRUCTION MANUAL
below for the others.
pull-down
menus
on page 45 for a table.
Parameter Reference
Parameters accessed via
on page 74.
value
fields
7ML19985JP02