8G Power Trace - Stairmaster 8G Gauntlet Service Manual

8G Power Trace

8G (9-5250)
This document reviews the power-trace procedure for the 8-G Stepmill.
This guide begins after the shrouds of the unit have already been removed.
Tools Required:
• Multi-Meter
• Phillips Screw Driver
ALL VOLTAGES GIVEN WHILE MACHINE IS NOT IN USE
1. Using a multi-meter, test the wall outlet for
110VAC OR 220VAC* (Fig. 1).
*Voltage and current can vary depending on country.
2. Test the power cord that connects the pow-
er adapter to the wall socket for 110VAC OR
220VAC* (Fig. 2).
*Voltage and current can vary depending on country.
Doc. #637-4523
Fig. 1
Fig. 2
Page 40