Brake/Transmission/Alternator Replacement Procedure
8G (9-5250)
This document shows how to replace the 8G-Gauntlet transmission/brake/alternator assembly.
Part#
711-3510-KT
- Kit, Trans w/ Brake & Alt, 8G
Tools Needed:
•
Ratchet
•
7/16" deep well socket
•
½" socket
•
1/8" hex key
•
Adjustable wrench
•
Flat-head screwdriver
•
Philips screwdriver
•
Large zip-tie or Velcro strap
1.
After removing the user left side shroud, use a 7/16" socket or
adjustable wrench to remove the bracket bolt
2.
Use a 1/8" inch hex key to loosen the transmission sprocket
set screws shown
Doc. #637-4360
Page 85