6.
Click the text box underneath "Flash Filename" this will open up a new window, then select the location of the
8_G_LCB_RELEASE_VER_X.XX.hex file. In the example below, the location of 8_G_LCB_RELEASE_VER_X.XX.hex
is "C:\Users\jchavez\Desktop\8-G LCB FISP Software. " The EEPROM Filename needs to remain blank.
File location selection
7.
Once the .hex file location has been selected, click the green arrow next to "FISP" to load the software onto the
FISP uploader.
8.
You will receive the following pop up window if the upload was successful.
HEX file selection
Page 81