Stairmaster 8G Gauntlet Service Manual page 39

12. Slide two lengths of the new step chain onto the
exposed stepshafts and secure using the hard-
ware removed in step 9.
NOTE: A portion of the new stepchain has been
removed to show clarity.
13. Turn the steps backwards so that they move up
the unit and repeat steps 9 - 11 until the new
step chain is secured to the remaining stepshafts
and the old step chain has been completely
removed from the machine. Use the remaining
master link on the new step chain to secure the
end of the new step chain to itself to complete
the loop (Fig. 12).
REMINDER: Be sure the re-attache the drive
chain before re-attaching the shrouds.
Fig. 11
Fig. 12
Page 39