Major Components Of The Power System; Wiring Connections To Alternator - Stairmaster 8G Gauntlet Service Manual

Major Components of the Power System

Battery 6VDC
Cable to RPM Sensor
Main Data Cable to Display
Alternator Cable Harness
Power enters the system through a power converter brick plugged into the wall. It runs through an
EMI filter into the LCB where it is distributed to the rest of the system based on console signals. The
LCB is also connected to a pair of load resistors. The 6VDC battery on the 8G provides momentary
power to the unit during startup and is recharged by the alternator.
For a detailed view and list of alternator connections and troubleshooting, see the Troubleshooting section of this man-
ual.
LCB 711-3461

Wiring connections to Alternator

Load Resistors
Page 10