Alternator Replacement
8-G (9-5250)
This document reviews the process to replace the alternator on the 8-G stepmill.
Tools Required:
•
1/8" Allen Key
•
7/16" Socket
•
½" Socket
•
3/4" Socket
1.
Remove the four (4) rivets securing the user
left side shroud to the frame, then remove
the user left shroud.
NOTE: Be sure to remove the white plastic
fastener from the inside of the shroud.
2.
Use a 7/16" socket to remove the bracket
securing the gear box to the frame
Doc. #637-4489
Page 31