Power Flow - Stairmaster 8G Gauntlet Service Manual

Power Flow

A power trace tests the voltage at every junction point of electricity on the machine from the wall to the console to
validate good power flow and eliminate power as part of routine troubleshooting. Refer to the diagram above for the
general flow of a power trace of the 8G. For detailed instructions on how to perform a power trace, see below.
1. Using a multi-meter, test the wall outlet for
110VAC OR 220VAC*
*Voltage and current can vary depending on country.
Warning: the following procedure requires the power to be on.
Please exercise caution when working around live electrical components
Page 18