Dmp Compact Module 1I Analog 6Fc5 111-0Ca04-0Aa0 - Siemens SINUMERIK 840DE User Manual

03.06
7.4

DMP compact module 1I analog 6FC5 111-0CA04-0AA0

The DMP compact module 1I analog is an encapsulated module. It can be
plugged into a slot of the (PROFIBUS DP or NCU) terminal block as a plug-in
module. The conversion time is a max. of 60 ms in the rated range and a max.
of 80 ms in the overshoot range.
Fig. 7-4
S
Interfaces
S
S
Display elements
1 LED as a status display for the power supply.
LED lit:
Jumpering
S1:
S2:
© Siemens AG, 2006. All rights reserved
SINUMERIK 840D Configuring Manual NCU (PHD) – 03.06 Edition
7.4 DMP compact module 1I analog 6FC5 111-0CA04-0AA0
Status
POWER
SUPPLY
LED
O.K.
Labeling
strips
ANALOG
IN
Fastening
screw
Front view and side view of a DMP compact module 1E analog
A 30-pole connector X1 for connection to the NCU terminal block.
4x terminal X3 (Phoenix, Type MSTB2.5/4-ST-5.08 GREY, Order No. for X3:
18 48 407) for connecting the power supply for the analog part and 6x termi-
nal X2 (Phoenix, Type MSTB2.5/6-ST-5.08 GREY, Order No. for X2: 17 87
076) for connecting the analog input.
The terminals are pluggable and can be mechanically coded by the custo-
mer.
Internal power supply OK
Setting of the measurement range
1–2 closed: +10 V
1–3 closed: +500 mV
Setting the line frequency
closed: for 50 Hz systems
open: for 60 Hz systems
7 DMP Compact Modules
M1 M2
P1 P2
2.5
24 V DC
0 V
X3 Connection terminals
S1
X1
1 1
3 2 2
6 . . 1
X2
Terminal:
6, 1 Shield
2 Curr. source for PT100
2,5
3 Analog input In+
4 Analog input In–
5 Ground
S2
7-83