16" Dual-Sided Analog Clock Installation - Primex XR Series Installation Manual

Step 2 - Assemble clocks to dual mount bracket
1. Insert batteries into each clock. The clocks set to the correct time after they receive a valid time signal from the
system transmitter.
2. Place each clock in the housing with the 10/11 and 4/5 numerals over the brass posts.
3. Place your hands at the 10/11 and 4/5 positions and turn the clock clockwise to lock into place. Repeat this step
for each of the two clocks.
4. Examine the mounting plate to ensure the bracket is fully engaged. The small hole in top side of the mounting
plate should be visible and fully exposed. To increase the security of the clock assembly, a common screw may be
inserted into the hole and screwed into the wall.

16" Dual-Sided Analog Clock Installation

A 16" Dual-Sided Analog Clock consists of two analog clocks and a Dual Clock Kit. Using the kit you combine two clocks
to create a dual-sided clock, which can be either ceiling or wall mounted.
Primex Wireless
XR Series Analog Clock Installation Guide
24