Primex XR Series Installation Manual page 31

1. Connect one end of cable (2) to connector (1). Push connector on and turn connector 1/4 turn to lock in place.
2. Connect the other end of cable (2) to one end of connector (5). Push connector on and turn 1/4 turn to lock in
place.
3. The Right angle connector (6) is for horizontal bracket mounting. Remove the right angle connector (6) for vertical
mounting of bracket.
NOTE: Antenna must be vertical.
4. For vertical mounting, connect antenna (7) to the other end of connector (5). For horizontal mounting, connect
antenna (7) to the right angle connector (6).
5. Use two screws (4) to secure bracket (3).
Figure 5: Remote Antenna Analog Clock
Primex Wireless
XR Series Analog Clock Installation Guide
31