Specifications - Smart-Sync Analog Clock - Primex Smart-Sync Install Manual

Specifications - Smart-Sync Analog Clock

Battery-powered models
Typical five (5) year battery life. Battery life is based on operating conditions and may vary due to installed site conditions.
2 D-cell alkaline batteries (not included)
Electric (AC-powered) models
Power Supply 100-240 VAC, 18 in. (45.72 cm) cord with plug
Single-Sided: 67mA @ 120 VAC
Dual-Sided: 134mA @ 120 VAC
Bluetooth® Wireless Communication Protocol
Bluetooth® Low Energy (BLE) Wireless Technology, version 4.1
Bluetooth Range - up to 80 feet (24.3 meters)
Operation
Upon first-power up at installation location, a clock enters self-discovery mode to establish connection to Smart-Sync Bluetooth
Wireless Network.
Clock connects to Smart-Sync Bluetooth Wireless Network to synchronize its time and download setting updates.
Automatically adjusts for Daylight Saving Time (DST)
Daily midnight hand verification check; if this check shall fail for three consecutive days, the clock enters a hand position failure
status.
If power is interrupted, the clock stops until power resumes. Upon resumption of power, the clock self-corrects to the current
time.
Environment
Operating Temperature: 32° F to 95° F (0° C to 35° C); indoor use only
Storage Temperature: 14° F to 140° F (-10 °C to 60 °C)
Certifications
FCC, CE, and IC compliant
8