Primex XR Series Installation Manual page 25

Dual Clock Kit supplied parts
(1) Dual mount bracket
(1) Mounting plate
(4) #6 x 1/2" long screws
Screws and anchors supplied with each clock are included in the order packaging.
How to assemble and install a 16" dual-sided clock
1. At the installation location, measure and drill holes into the wall or ceiling to align with the mounting plate hole
spacing measurements.
2. Fasten a supplied #6 x 1/2" long screw to each mounting post located on the backside of each clock, leaving a 1/8
to 3/16 in. gap between the screw head and mounting post.
Primex Wireless
XR Series Analog Clock Installation Guide
25