12" Dual-Sided Battery Analog Clock Installation - Primex XR Series Installation Manual

12" Dual-Sided Battery Analog Clock Installation

A 12" Dual-Sided Battery Analog Clock consists of two analog clocks and a Dual Bracket Kit. Using the kit, you combine
the two single-sided clocks to create a dual-sided clock, which can be either ceiling or wall mounted.
Dual bracket kit supplied parts
(1) Dual mount bracket
(1) Mounting plate
Screws and anchors are supplied with the single clock packaging.
Step 1 - Mount bracket kit to wall or ceiling
1. Measure and drill holes into the wall or ceiling to align with the mounting plate hole spacing measurements.
2. Attach the mounting plate to the wall or ceiling using the provided anchors and screws.
3. Slide the dual clock bracket over the four tabs on the mounting plate. A tap with a rubber mallet on the clock
bracket may be required to seat the clock bracket assembly fully into place.
Primex Wireless
XR Series Analog Clock Installation Guide
23