Remove A Clock From A Dual-Mount Bracket - Primex XR Series Installation Manual

Remove a Clock from a Dual-mount Bracket

Complete the steps below remove a clock from a dual-mount bracket. This procedure is commonly performed to replace
clock batteries.
1. Place your hands at the 10/11 and 4/5 positions.
2. Turn each clock counter clockwise to unlock the clock housing from the twist-lock mount.
Reassemble Clocks to Bracket
1. Place clock in the housing with the 10/11 and 4/5 numerals over the brass posts.
2. Place your hands at the 10/11 and 4/5 positions and turn the clock clockwise to lock into place.
Primex Wireless
XR Series Analog Clock Installation Guide
36