16" Dual-Sided Analog Clock Installation - Primex XR Series Install Manual

16" Dual-Sided Analog Clock Installation

A 16" Dual-Sided Analog Clock consists of two analog clocks and a Dual Clock Kit. Using the kit you combine two clocks to
create a dual-sided clock, which can be either ceiling or wall mounted.
Dual Clock Kit contents
(1) Dual mount bracket
(1) Mounting plate
(4) #6 x 1/2 inch long screws
Screws and anchors supplied with each clock are included in the order packaging.
How to assemble and install a 16" dual-sided clock
1. At the installation location, measure and drill holes into the wall or ceiling to align with the mounting plate hole spacing
measurements.
2. Fasten a supplied #6 x 1/2 inch long screw to each mounting post located on the backside of each clock, leaving a 1/8 to
3/16 inch gap between the screw head and mounting post.
33