Primex XR Series Installation Manual page 33

4. Mount the wall bracket to the wall using the supplied hardware parts. (anchors not shown).
5. Place the O-Ring in the grove at the top of the bracket. Stretch and press the O-Ring in the groove all the way
around the clock.
6. (Optional) Apply the supplied lubricant to the O-ring or to the inner side of the clock case. Align the clock face as
desired and press the clock into the bracket; approximately 3/16" away from the wall.To remove the clock, insert
and turn a wide standard screwdriver in the removal slots.
Primex Wireless
XR Series Analog Clock Installation Guide
33