12" Dual-Sided Battery Analog Clock Installation - Primex XR Series Install Manual

12" Dual-Sided Battery Analog Clock Installation

A 12" Dual-Sided Battery Analog Clock consists of two analog clocks and a Dual Clock Kit. Using the kit, you combine the two
single-sided clocks to create a dual-sided clock, which can be either ceiling or wall mounted.
Dual bracket kit contents
(1) Dual mount bracket
(1) Mounting plate
Screws and anchors are supplied with the single clock packaging.
Step 1 - Mount bracket kit to wall or ceiling
1. Measure and drill holes into the wall or ceiling to align with the mounting plate hole spacing measurements.
2. Attach the mounting plate to the wall or ceiling using the provided anchors and screws.
3. Slide the dual clock bracket over the four tabs on the mounting plate. A tap with a rubber mallet on the clock bracket may be
required to seat the clock bracket assembly fully into place.
31