Charging with the communication unit (CU-501, CU-511 and CU-521)
or battery charger (CH-551)
1.
Slide the battery cover lock (1) in the direction shown
by the arrow, and remove the battery cover (2).
2.
Check the battery cartridge terminals and direction
indication on the BHT, and insert the battery
cartridge in the direction shown by the arrow.
Pull the battery pull strap upward as
Point
shown on the right to remove the battery
cartridge easily.
3.
Close the battery cartridge cover (1) and return the
battery cover lock (2).
Ensure that the battery pull strap is not
Point
jammed by the cover.
4.
Connect the dedicated AC adapter to the DC input
connector on the charger and plug the adapter into
the wall socket.
The charger Power LED (green) turns ON.
Barcode Handy Terminal
Pull up
Be careful not to
jam the strap.
Terminal
15