Denso BHT-500B User Manual page 68

Setting Value Selection
Use the following procedure to select setting values.
1.
Press the numerical key corresponding to the item to be
selected.
Alternatively, press the cursor keys ([▲] [▼]) to select the
item.
The selected item will be highlighted.
2.
Select the setting value with the cursor keys ([◄] [►]).
3.
Press the ENT key.
The selected setting value will be set.
Barcode Handy Terminal
 Operation example
Select the setting item with the
[2] key or [▲]/[▼] keys.
Select the setting value with
the cursor keys ([◄] [►]).
ENT key
51