Denso BHT-500B User Manual page 148

13.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highligh
WPA CIPHER] and then press the ENT key
The screen on the right displays.
[1: CIPHER MODE]:
14.
Ensure that [1: CIPHER MODE] is highlighted and then select
TKIP or AES.
Select TKIP to use TKIP.
Select AES to use AES.
15 .
Press the ENT key or press and hold the BS
SET RF PARAMETER menu.

Wireless Security WPA-PSK Mode
PSK authentication and an encryption system can be used with wireless security WPA-PSK mode.
1.
Select "2: CONFIGURATION" at the SET SECURITY menu and
then press the ENT key.
The screen on the right displays.
[1: AUTH PARAM (PSK)]: PSK authentication parameter setting
[2: WPA CIPHER]:
Press and hold the BS/C key to re
2.
Use the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1:
AUTH PARAM (PSK)] and then press the ENT k
The screen on the right displays.
[1:PRE SHARED KEY]:
Selects TKIP or AES.
Encryption system setti
turn to the SET SECURITY menu.
Sets the shared key.
Barcode Handy Terminal
t [2:
.
/C key to return to the
ng
ey.
131