Denso BHT-500B User Manual page 190

Message
The date and time settings
screen displays, awaiting
entry.
The message continues to
display.
If this error occurs, the BHT
beeps five times.
If this error occurs, the BHT
beeps five times.
BHT Response
The
integrated in the BHT has
stopped because:
- the battery cartridge had
- the battery cartridge had
After shut down abnormally,
the
without the battery cartridge
loaded, or with discharged
battery cartridge loaded, so
unsaved data was lost.
During execution of System
Program,
Program has attempted to
write
write-protected area of the
memory.
(xxxxxxxx: Error address)
During execution of System
Program, the System
Program has received an
invalid command code.
(xxxxxxxx: Error address)
Barcode Handy Terminal
Cause
calendar clock
been removed for a long
time,
not been recharged for a
long time.
BHT has been left
the System
onto the
Countermeasure
Set the current date and
time.(Refer to "Chapter 2
BHT Preparation" – "2.4
Initial Setup")
Contact your system
administrator.
Unload and reload the
battery cartridge, then
turn the BHT on.
If this error occurs
frequently, make a note
of the displayed
message and codes and
contact your system
administrator.
173