Page 2
DENSO WAVE. 2) The use of DENSO WAVE ’ s products in a manner for which they were not intended nor designed. 3) The modification of DENSO WAVE ’ s products by parties other than DENSO WAVE.
Please note that these privileges may be subject to change without prior notice. How to Register Access the URL below and follow the instructions provided. http://www.qbdirect.net Inquiries For inquires relating to products, please access our website https://www.denso-wave.com Technical inquiries can be made at our exclusive website for registered users (QBdirect).
Barcode / 2D Code Handy Terminal Safety Precautions Be sure to observe all these safety precautions. Please READ through this manual carefully. It will enable you to use the BHT and CU correctly. Always keep this manual nearby for speedy reference. Safety precautions description in this document Strict observance of these warnings and cautions is a MUST for preventing accidents that could result in bodily injury and substantial property damage.
Page 5
BHT-1700 Series DANGER Handling the batteries Wrong handling the batteries may result in electrical shock, overheating, smoke generation, combustion, blowout, or leakage of battery fluid. Please read the following items prior to use. • Never disassemble or modify the battery. Do not stick a needle into the battery, hammer at it, or tread on it.
Page 6
Barcode / 2D Code Handy Terminal WARNING To system designers • When introducing BHTs in those systems that could affect human lives, develop applications carefully through redundancy and safety design which avoids the feasibility of affecting human lives even if a data error occurs. Handling the BHT Wrong handling of the BHT may affect normal operation or result in, electric shock, generating heat and smoke, and vision disturbance.
Page 7
BHT-1700 Series Handling the batteries Wrong handling of the batteries may result in electric shock, generating heart and smoke, combustion, or blowout. Please read the following items prior to use. • The battery is exclusively for the BHT. Do not use the battery for purposes other than charging the BHT.
Page 8
Barcode / 2D Code Handy Terminal CAUTION Handling the BHT Wrong handling of the BHT may affect normal operation or result in overheating, smoke generation, failure, and vision disturbance. Be sure to observe the following. When using the hand strap or neck strap, exercise due care to avoid getting them caught in •...
BHT-1700 Series About This Product The BHT-1700 handy terminal, powered by Android ™ 7.1.2 Nougat, is light-weight, easy to use, providing powerful and handy tools for the purpose of delivering flexibility in customisation. Specifically designed to work as an industrial PDA, it provides rich options for data collection, voice and data communication, long-lasting working hours, and so on.
Page 10
Barcode / 2D Code Handy Terminal 1 Quick Start Guide 1.1 Appearance 1.1.1 Main Body BHT-1700QWB BHT-1700BWB BHT-1700QLWB...
Page 12
Barcode / 2D Code Handy Terminal Description of key Name Function and overview Denotes the code reading status or the charging Status indicator status with color or flashing state of light. Speaker Sound comes out of it. Receives speaker's voice when talking. This function Receiver is mounted in the WWAN model.
BHT-1700 Series 1.1.2 Keyboard panel Key functions can be set with the user program. Name Function and overview Backspace key Deletes the last one character. SCAN key Reads codes. ENT (Enter) key Fixes input data and processes the operation. Move a cursor in the direction indicated by the arrow, and Cursor key also selects the function.
Barcode / 2D Code Handy Terminal 1.2 Supporting Model List BHT-1700 series enables the option selection by model as shown in the table below. WLAN, Receiver, LTE, GPS microphone Bluetooth ® BHT-1700BWB-1 — — — ✓ BHT-1700QWB-1 — — —...
Page 15
BHT-1700 Series Step 1 Loosen the hand belt Press and slide the battery cover lock in the direction indicated by the arrow. Step 2 Remove the battery cover. Step 3 Pay attention to the direction of the battery electrodes and install the battery.
Page 16
Barcode / 2D Code Handy Terminal Step 5 Close the battery cover . By keeping it pressed to the BHT body, press and slide the battery cover lock in the direction indicated by the arrow to lock the battery cover in position.
Page 17
BHT-1700 Series SIM2 SIM1 mi croSD Supporting card Both SIM1 and SIM2 card slots support 2G/3G/4G cards. However, 3G/4G data can be transmitted on either SIM, but not on both at the same time. For details on managing dual SIM cards, refer to SIM Card Management (WWAN Model Only) in the Software User ’...
Page 18
Barcode / 2D Code Handy Terminal 1.5 Power ON/OFF BHT Power ON To power on BHT, press and hold the power button located on the upper right side of BHT. BHT will turn on and show the lock screen after splash screen. Swipe the lock screen upward to display the home screen.
BHT-1700 Series 1.6 Using Hardware Buttons On the bottom of BHT are three hardware buttons that deliver the following functions. Button Function Description Returns to the previous screen or closes the active Back button window or keyboard. Home button Displays the Home screen. Recent apps Opens a list of recently used applications.
Barcode / 2D Code Handy Terminal 1.7 Charging The main battery may not be charged to full for shipment. When you first receive the kit package, you need to charge the main battery to full before using BHT. You may use the Communication Unit or multiple BHT charger to charge the BHT.
Page 21
BHT-1700 Series 1.7.4 Use of USB Direct Cable The USB Direct Cable provides a convenient way to charge your BHT. Fasten the USB Direct Cable to the lower end of the BHT. Connect the other end of the cable to the USB port or the USB power adapter of a host computer. It may take long to charge to full depending on the power supply capacity of the host computer.
Page 22
Barcode / 2D Code Handy Terminal AC adaptor DC input plug As for CU-BU1-17, the BHT may be charged through the USB connector. It may take longer to charge than when using the AC adaptor. Do not charge a spare battery using the USB power supply.
Page 23
BHT-1700 Series Charging procedure Charge your BHT using the Communication Unit as described below. Insert your BHT onto the Communication Unit. Press BHT down till you hear a ‘ click ’ to make sure it is secured in the charging station. Insert a spare battery in the slot for charging the spare battery located at the back of the CU as shown in a figure below.
Page 24
Barcode / 2D Code Handy Terminal Notice on the power source of the Communication Unit As for Communication Unit CU-BU1-17 with USB interface, be sure to unplug the USB connector first and then unplug the DC input connector when both DC input connector and USB connector are inserted.
Page 25
BHT-1700 Series 1.8 Communication The barcode data collection system using BHT can connect various types of hardware to the BHT through each communication system.
Barcode / 2D Code Handy Terminal 1.8.1 USB Communication Communication between BHT and a host computer through the Communication Unit with USB interface or by directly connecting them using the USB direct cable to enable the data communication complying with USB2.0 standard. For the connection with the Communication Unit, refer to 1.7.5 Use of Communication Unit.
BHT-1700 Series 1.8.6 NFC Communication Communication between BHT of NFC supporting model and NFC tag or NFC supporting device to enable data communication complying with Mifare, Felica standard. Near Field communications (NFC) uses close proximity (2 cm or less) to establish WLAN communication through electromagnetic fields.
Page 28
Barcode / 2D Code Handy Terminal 2 Using BHT-1700 2.1 Battery Main Battery BHT is powered by BT-110LA, 3.7 V/2300 mAh or BT-110L, 3.7 V/3450 mAh rechargeable Li-ion battery pack. It takes approximately 3 hours for BT-110LA standard battery and 4.5 hours for BT-110L large capacity battery at 18 °...
Page 29
BHT-1700 Series To check the exact remaining percentage of power and battery life: Swipe down from the top of the screen with two fingers to open QuickSettings. The percentage of remaining battery power is shown below the battery icon; you can tap on it to enter Battery Settings for more details and configurations.
Page 30
Barcode / 2D Code Handy Terminal device has been running on battery power, and which applications are consuming the most battery power. To look at the timeline of each application that drained or has been draining the battery power, tap on the chart, which enables you to diagnose any serious power drains.
Page 31
BHT-1700 Series Switch on the function and choose when to turn on this mode automatically. After enabling this function, the title bar of the screen will turn orange. The battery saver mode will automatically turns off when BHT is charging. Battery optimisation With Battery optimisation enabled for the applications, you can make sure they stay inactive when your BHT is idle or when applications have not been used for days.
Page 32
Barcode / 2D Code Handy Terminal On the dropdown list, select “ All apps ” , and all the applications will be optimised by this function by default. You can individually turn off the optimisation mode of certain app. If you would like it always activated by tapping on the App.
Page 33
BHT-1700 Series Open the battery cover and insert a charged battery as in Installing Battery. Press the power button to power on. Before replacing the main battery, make sure the backup battery is well-charged in order to avoid unnecessary data loss. After removing the main battery, insert a well-charged battery as soon as possible.
Barcode / 2D Code Handy Terminal 2.1.3 Power Management Here are some tips to help you save battery power. Caution: Using backlight, wireless connectivity, and peripheral devices while on battery power will substantially reduce battery power. Bring an additional main battery pack with you when you go out. ...
BHT-1700 Series 2.2 Memory Flash Memory (ROM) • 16 GB flash memory for storing the OS (Android 7.1.2 Nougat) and custom application programs. • Random-access memory (RAM) • 2 GB RAM for storing and running programs, as well as storing program data •...
Barcode / 2D Code Handy Terminal 2.4 Notifications 2.4.1 Status Indicator Status indicator located above the touch screen provide information about charging status, scanner light beam, and scanner “ Good Read ” during data collection. Status Action Description indication Green, solid Charging complete Charging Red, solid...
BHT-1700 Series 2.5 Camera (Camera Integrated Model Only) An integrated 8-megapixel rear camera in BHT is specially designed for collecting image data. You may use the Camera application to take images. By default, the images taken by this camera application are saved as JPG files in DCIM folder in the BHT's main storage.
Barcode / 2D Code Handy Terminal 3 Basic Operation This chapter describes the basic skills to work with BHT-1700 handy terminal, for instance how to operate the home screen, check of system statuses and management notifications. The add-on utilities for applications regarding data reading, processing and transmission are introduced in the following chapters.
BHT-1700 Series 3.2 Keyboard Input When the text input field appears, the on-screen keyboard is opened automatically. The style of keyboard varies according to the data type (texts or numbers) this field requires. Data can also be input with the keyboard in the main body of BHT.
Barcode / 2D Code Handy Terminal 3.3 Data Transmission Data collected by BHT can be transmitted to the host computer by USB communication, Ethernet communication, Bluetooth communication, WLAN communication and WWAN communication. ® Data transmission methods and setting methods vary according to the system our customer uses. Please contact a system administrator for details of the operation.
BHT-1700 Series Disabling screen lock Default slide gesture Entering a pattern to unlock Using the PIN code to unlock Entering a password of at least 4 characters to unlock By selecting a method, such as pattern, PIN or Password, you can access advanced settings to customise personal lock settings.
Page 42
Barcode / 2D Code Handy Terminal 4 Specifications 4.1 Model/Platform/Processor/Memory BHT-1700 comes in six models as described below: WWAN model: BHT-1700QWBG-1, BHT-1700QWBG-2 WLAN model: BHT-1700BWB-1, BHT-1700QWB-1, BHT-1700QWB-2, BHT-1700QLWB-P 4.1.1 Operating system/CPU OS version Android™ 7.1.2 Nougat Qualcomm APQ8009 (WLAN model) Quad-core1.3 GHz ®...
Perform a sufficient reading test with a card to be used preliminarily. It is not recommended to read the IC driver ’ s license. (DENSO WAVE has already checked and evaluated that a part of driver ’ s licenses are not readable.) 4.3 Electrical Characteristics...
Integrated with one speaker, dual array digital microphones with echo and noise cancellation, HD voice support 4.4.3 Dimensions and Weight Dimensions BHT-1700BWB-1: 194.5 mm X 71.0 mm X 44.0 mm (Length X Width X BHT-1700QWB-1: 188.5 mm X 71.0 mm X 32.3 mm Height) BHT-1700QWB-2: 188.5 mm X 71.0 mm X 32.3 mm...