Denso BHT-500B User Manual page 124

[9] PING test
(only on BHT-500B units equipped with software supporting LAN communication)
Use the following procedure to perform a PING test.
1.
Select "9: PING " at the TEST menu and then press the ENT key.
The TEST PING screen displays as shown on the right.
"1: RUN PING":
"2: SET PING":
"3: SET DEVICE":
Refer to the following section f
Press and hold the BS/C key to return to the TEST menu.
 "1: RUN PING" (PING Test Screen)
1.
Select "1: RUN PING" at the TEST PING menu and then press the
ENT key.
T he current setting values display, and the BHT waits for the transmission
c ount to be entered.
To change the number of echo requests displayed, enter the desired value
using the numerical keys.
To delete a single character, press the BS/C key.
Press and hold the BS/C ke
2.
Press the ENT key.
When the PING test starts running, the message shown on th
displays.
Press and hold the BS/C key
Runs the PING test.
Displays the PING parameter setting screen.
Displays the PING device setting screen.
or details of the above items.
y to de lete all entries made.
to a bort the PING t est.
Barcode Handy Terminal
e rig ht
107