Denso BHT-500B User Manual page 143

BHT-500B
8.
Press and hold the BS/C key to return to the SET RF PARAMETER menu.
It is not possible to re
- Point -
be stored in a safe location. When not setting a WEP key,
the
If an attempt is made to save an incorrect encryption key, and error will
occur, and the screen on the right displays.
Reset with a correct encryption key.
In correct Encryption Key Examples

T he encryption key length is incorrect.
 Characters other than hexadecimal notation (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A,
B, C, D, E, F) are used.
Repeat the above procedure to set the requ
for WEP KEY 1 to 4.
Following that, set the transmit key.
9.
Use the cursor keys ([▲] [▼]) or numerical key ([6])
TRANSMIT KEY], and then press the ENT key.
The screen on the right displays.
10.
Use the cursor keys ([◄] [►]) to highlight the key number to
be used.
Select a key number for which an encryption key has been
- Point -
set.
11.
Press the ENT key or press and hold the BS/C key to return
to the SET RF PARAMETER menu.
126
ad a written WEP key, and therefore the WEP ke
previous setting.
ired number of encryption keys
to highlight [6:
y setting must always
the WEP key will be the same as