About This Manual - Denso BHT-500B User Manual

BHT-500B

About this Manual


Due to improvements and so on, the content of this manual may be subject to change without prior notice.

The reproduction or duplication of the whole or part of this manual is strictly prohibited without prior consent.

Every attempt has been made to ensure that the content of this manual is thorough and up to date, however, we
kindly ask that any questionable content, mistakes, or omissions be reported to DENSO WAVE.

The copyright for this User's Manual belongs to DENSO WAVE INCORPORATED.
Manual Composition
This manual is made up of the following 9 chapters.
Chapter 1
Describes the BHT system and provides an overall outline of the BHT.
Chapter 2
Describes information required by the user and procedures that must be performed prior to
commencing operation.
Chapter 3
Describes basic operations performed by the operator and how to make basic changes to settings such
as the beeper volume.
Chapter 4
Describes how to initialize and update the system, start up a user program, and operate System Mode.
Chapter 5
Describes interfaces and communication specifications.
Chapter 6
Describes battery cartridge replacement and daily procedures for taking care of the BHT.
Chapter 7
Describes causes and countermeasures for error messages expected to occur during basic operation.
Chapter 8
Describes specifications for hardware, readable barcodes, and interfaces.
Appendices-1
Describes the main specifications for the CU-500 Series (option).
Appendices-2
Describes causes and countermeasures when unable to transfer files.
iii
Outline
BHT Preparation
Basic Operation
System Operation
Communication
Maintenance
Error Messages
Specifications
CU-500 Specifications (Option)
When File Transfer is Not Possible Using the Transfer Utility