Transmitting Data - Denso BHT-500B User Manual

3.5 Transmitting Data

Data gathered by the BHT can be transmitted to the host computer by connector communication, infrared
communication and wireless communication*.
The data transmission method and BHT setting method will differ depending on the system used, and therefore the
system administrator should be contacted for details of operation.
Request
Data gathered by the BHT should be promptly uploaded to the host computer.
Connector
communication
Infrared
communication
Infrared
communication
Infrared
communication
Wireless
communication*
Dedicated interface cable
CU-501 : RS232C
CU-521 : USB
CU-511 : Ethernet
CU-501
CU-521
CU-511
Wireless LAN access point
* BHT-504BW only
Barcode Handy Terminal
Host computer
Ethernet
To perform wireless communication with a wireless LAN
access point, it is necessary to configure the wireless local
area network (wireless LAN) at the BHT and access point.
35