Denso BHT-500B User Manual page 122

 Connector Communication Test
1.
Wire the cable with JC-25-P-3 (2.5mm stereo mini-
BHT connector communication port.
2.
S elect "2: CONNECTOR" at the TEST COMMUNICATION menu
a nd then press the ENT key.
T he TEST COMMUNICATION screen displays as shown on the right.
If an error occurs, the BHT beeps three times and displays the screen on
the right.
The meanings of the error codes in parentheses are as follows.
( X X )
1:
2:
1: 300 bps
2: 115200 bps
Press a nd hold the BS/C key to return to the TEST COMMUNICATION
menu.
pon normal completion of the test, the BHT beeps once and displays the
U
s creen on the right.
P ress and hold the BS/C key to return to the TEST COMMUNICATION
m enu.
The received data is different from the sent data.
A timeout has occurred during standby for data
reception.
Barcode Handy Terminal
plug) as s hown below and connect to the
105