Denso BHT-500B User Manual page 141

BHT-500B
 Wireless Security None Mode
WEP can be used with the Wireless security None mode.
To enable WEP, WEP and WEP KEY settings are required.
The first WEP KEY set
After setting the encryption key, the encryption key used is specified by
Refer to "Chapter 5 Communicati
T RANSMIT KEY.
1.
Select "2: CONFIGURA
then press the ENT key.
The screen on the right displays.
[1 : WEP OPTION]:
[2 : WEP KEY1]:
[3 : WEP KEY2]:
[4: WEP KEY3]:
[5: WEP KEY4]:
[6: TRANSMIT KEY]: TRANSMIT KEY settings
Press and hold the
2.
Use the cursor keys ([▲] [▼]) or numeric
WEP OPTION], and then press the ENT key.
The screen on the right displays.
[1: WEP]:
[2: AUTHENTICAT
3.
Press the ENT key or press and hold the BS/C key to return to the SET RF PARAMETER
menu.
124
ting is the encryption key, which can be set from WEP KEY 1 t
on" – "5.3 Wireless Communication" for
TION" at th e SET SECURITY menu and
WEP option settings
WEP KEY 1 settings
WEP KEY 2 settings
WEP KEY 3 setting s
WEP KEY 4 settings
key to return to the SET SECURTIY menu
BS/C
Selects whet her to enable or disable WEP.
The highligh ted setting is the current setting.
E]: Selects open system setting
authentication.
Select shared key authentication.
The highlighted setting is the current setting.
setting the TRANSMIT KEY.
al key ([1]) to highlight [1:
s or shared key
o 4.
details of the WEP KEY and