Chapter 10 Rechargeable Battery Cartridge Charging And Replacement - Denso GT20Q-SB User Manual

2d code handy scanner
Table of Contents

Advertisement

Chapter 10
Rechargeable Battery Cartridge Charging and Replacement
A warning beep will sound when the battery level of the rechargeable battery cartridge becomes low. When the warning beep
sounds, charge the rechargeable battery cartridge.
While charging, it is normal for the scanner body and the battery charger to become hot.
10.1 Rechargeable Battery Cartridge Charging Method
Handling precautions
Charge in the following locations.
- Locations with an ambient temperature between 10°C and 40°C
- Locations with humidity between 20% and 80%
- Locations with little dust and no excessive vibration
- Locations which will not come into contact with water
Do not place the scanner or rechargeable battery cartridge in direct sunlight (closed vehicles, etc.) or in high-temperature
locations.
Avoid charging in locations where noise etc. is present, such as near general telephones, televisions, radios, etc.
Unplug from the outlet when not in use.
Occasionally clean the charging terminals with a cotton swab, etc. The battery will not charge correctly if the terminals are
dirty.
Battery charger
Power LED (green)
AC adapter
Indicator
LED
72
Scanner

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents