Advertisement
Quick Links
Download this manual
See also:
User Manual
Operation manual
1. Data communication with potable printer.
(1) Registration of portable printer and selection of the portable printer
- Transmits the registration signal from potable printer and register the portable printer at the BHT-8000.
- Transmits the selection signal from BHT-8000 to the portable printer and connect the BHT-8000 with
portable printer.
(2) Bar code reading and data transfer
Bar code
BHT-8000 reads the bar code and transmits the reading data to portable printer. Portable printer
prints the receipt.
2. Data communication in public circuit
(1) Registration of cell phone and selection of the cellular phone
- Transmits the registration signal from cellular phone and register the cellular phone at the BHT-8000.
- Transmits the selection signal from BHT-8000 to the cell phone and connect the BHT-8000 with cellular
phone.
(2) Bar code reading and call
Bar code
When BHT-8000 reads the bar code, the reading data is transmitted from cellular phone to the host
by public circuit.
Bluetooth RF signal
Bluetooth RF signal
Bluetooth RF signal
Cellular RF signal
modem
Host
modem
Advertisement
Related Manuals for Denso BHT-8000
Summary of Contents for Denso BHT-8000
- Page 1 Bluetooth RF signal - Transmits the registration signal from cellular phone and register the cellular phone at the BHT-8000. - Transmits the selection signal from BHT-8000 to the cell phone and connect the BHT-8000 with cellular phone. (2) Bar code reading and call...
-
Page 2: Components And Functions
Components and Functions Indication LED Illuminates in green when the BHT has successfully read the bar codes. Built-in antenna Used for Bluetooth wireless communication. Do not cover this by hand. Doing so may result in communications failures. Trigger switch (M4 key) Liquid crystal Press this switch to start display (LCD) -
Page 4: Reading Bar Codes
Reading Bar Codes Turn the BHT on, bring the bar-code reading window to the bar code to be scanned, and press the trigger switch. The BHT turns on the illumination LED to scan the bar code. When the BHT has read the bar code successfully, the indicator LED will illuminate in green. - Page 5 · Before reading labels, clean them if stained. · Avoid using the BHT in direct sunlight. The BHT might fail to read correctly. · To read bar codes on curved surfaces, apply the bar-code reading window to the center of each bar code at a right angle. ·...
-
Page 6: Using Bluetooth
Using Bluetooth™ The BHT-8000DB supports Bluetooth wireless data transmission. · If there are too many communications errors, first make sure that the BHT points directly at an access point because the 2.4 GHz band requires a more or less straight line path. Note also that the low-power radio waves have trouble passing through human bodies and other obstacles along that path.