Denso BHT-500B User Manual page 106

"2: IP ADDRESS": Setting the IP address
Select "2: IP ADDRESS" at the SET TCP/IP menu to display the screen on
the right where the current settings are displayed.
To change the setting:
(1) Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3]) to highlight
the item to be set and press the ENT key.
(2) The mode changes to entry mode and the cursor displays, allowing the
setting to be entered with the numerical keys and dot key.
To delete a single character, press the BS/C key. To delete the entire
entry, press and hold the BS/C key.
(3) Enter the desired value and then press the ENT key.
If the IP address, subnet mask and default gateway are all set to [0.0.0.0], DHCP is enabled.
Press and hold the BS/C key to return to the SET TCP/IP menu.
"3: TIMEOUT": Setting the timeout (when equipped with software
supporting LAN communication)
Select "3: TIMEOUT" at the SET TCP/IP menu to display the screen on the
right where the current settings are displayed.
Use the cursor keys ([▲] [▼]) to switch between the <CONNECTION>
screen and <DISCONNECTION> screen.
To change the setting:
(1) Use the cursor keys ([▲] [▼]) or numerical keys ([1] [2] [3] [4] [5]) to
highlight the item to be set and press the ENT key.
(2) The mode changes to entry mode and the cursor displays, allowing the
setting to be entered with the numerical keys and dot key.
To delete a single character, press the BS/C key. To delete the entire
entry, press and hold the BS/C key.
(3) Enter the desired value, and then press the ENT key.
Press and hold the BS/C key to return to the SET TCP/IP menu.
Barcode Handy Terminal
[▲] key / [▼] key
89