Denso BHT-500B User Manual page 43

If Scandisk finds an invalid file(s), the right screen will appear.
(As long as an invalid file exits, the screen displays every time the BHT
System is started up.)
(Refer to "About "$$BRKLST.SYS" on the following page.)
4.
Press the ENT key to start up the BHT System.
Scandisk when the resume function is enabled
If Scandisk runs when the resume function is enabled, the screen given right
may appear.
The BHT displays the screen for three seconds and then automatically runs
the execution program from the beginning.
(The screen may also appear when the calendar clock built in the BHT stops,
even without running Scandisk.)
The resume function is used to return the display to the status (screen) when the power was last
 Point 
turned OFF when the power is next turned ON.
Resume function settings are made at the "SET SYSTEM" menu. Refer to "Chapter 4 System
Operation" - "4.5.5 System Environment Settings (SET SYSTEM Menu)" for further details.
Barcode Handy Terminal
27