Denso BHT-500B User Manual page 90

 System Status Indication
Turning ON the system status indication displays the following icons at the bottom of the screen.
Indication
Key Shift status
Alphabet
entry mode
Communication link
with the CU-511
Radio link with
access point *
[3] Setting the calendar clock
When resetting the date and time, refer to "Chapter 2 BHT Preparation" -
"2.4 Initial Setup."
Select "3: DATE/TIME" at the SET SYSTEM menu and press the ENT key
to display the SET DATE/TIME menu screen on the right.
Icon
Displays when the keys on the keypad are in Shift mode.
Displays when the BHT is set to alphabet entry mode.
(If the alphanumeric entry system has been selected in user programs,
pressing the SF key switches from the numeric entry mode to alphabet
entry mode.)
Displays when a communication link is established with the CU-511.
Flashes when the BHT tries to communicate with a CU-511 that has not
been linked with the BHT.
Displays cyclically when the BHT receives no response from the
CU-511, or when it is waiting for the link to be established with or
severed from the CU-511.
If synchronization with the access point is established during wireless
communication, the overall quality of communication with the access
point is displayed incrementally. These respective icons indicate how
good the communication environment is.
Displays when synchronization with the access point has not been
established, or when authentication fails.
Barcode Handy Terminal
Description
* BHT-504BW only
73