Denso BHT-500B User Manual page 177

BHT-500B
 EAP TYPE
This is the EAP authentication method setting used for 802.1x authentication.
Select PEAP or EAP-TLS.
This is valid only when the Security mode is 1x Supplicant, WPA-1x or WPA2-1x.
 IDENTITY
This is the user ID used for 802.1x authentication.
A format that includes the domain name (<domain name>\<user name>) may be specified for the identity.
An identity, including the domain name, may be specified up to 32 bytes. The domain name may be
omitted.
 PASSWORD
This is the password used for 802.1x authentication.
This is valid only when the EAP TYPE is PEAP.
 ROOT CERTIFICATE
This setting is for the filename of the root certificate used for 802.1x authentication.
 CLIENT CERTIFICATE
This setting is for the filename of the client certificate used for EAP-TLS authentication.
 ANONYMOUS IDENTITY
This is the setting for the ID transmitted by EAP Request (ID) packet when performing PEAP
authentication.
 WPA CIPHER
This is the setting for the encryption method used when specifying WPA.
Select TKIP or AES. (when equipped with WPA2 compliant software)
 PRE SHARED KEY
This is the setting for the key used for WPA-PSK or WPA2-PSK.
Always set when the Security mode is WPA-PSK or WPA2-PSK.
160