Denso BHT-500B User Manual page 151

BHT-500B
8.
Use the cursor keys ([▲] [▼]) or numerical key ([4]) to highlight [4
press the ENT key.
The mode changes to entry mode
9.
Use the numerical keys to enter a password and pre
Press the SF key to change the entry m
To delete a single c
Press and hold the
10.
Use the cursor keys ([▲] [▼]) or numerical key ([5]) to highlight [5:
ROOT CERT] and then press the ENT key.
T he screen on the right displays.
Use the cursor keys ([▲] [▼]) to select a file name.
A "NO FILE EXISTS" message displays if no files exist.
11.
Use the cursor keys ([▲] [▼]) or numerical key ([6]) to highlight [6:
CLIENT CERT] and then press the ENT
The same screen as that for [5: ROOT CERT] displays.
Use the cursor keys ([▲] [▼]) to select a file name.
A "NO FILE EXISTS" message displays if no files exist.
12 .
Press and hold the BS/C key to return to the SET RF
13.
Use the cursor keys ([▲] [▼]) or numerical key ([2]) to highlig
WPA CIPHER] and then press the ENT key.
The screen on the right displays.
[1:CIPHER MODE]:
14.
Ensure that [1: C
TKIP or AES.
Select TKIP to use TKIP.
Select AES to use AES.
15 .
Press the ENT key or press and hold the BS/C key to return to the
SET RF PARAMETER menu.
134
and the cursor displays.
ode (numerical entry (no guidance dis
ha racter, press the BS/C key.
/C key to delete a ll entries made.
BS
Selects TKIP or AES.
IPHER MODE] is highlighted and then select
ss the ENT key.
key.
PARAMETER
ht [2:
: PASSWORD] and then
play) and alphabet entry).
menu.