Denso BHT-500B User Manual page 9

Handling the battery cartridge
 Never disassemble or heat the battery cartridge, nor put it into fire or water; doing so could cause
battery-rupture or leakage of battery fluid, resulting in a fire or bodily injury.
 Do not carry or store the battery cartridge together with metallic ball-point pens, necklaces, coins,
hairpins, etc.
Doing so could short-circuit the terminal pins, causing the batteries to rupture or the battery fluid to leak,
resulting in a fire or bodily injury.
 Never put the battery cartridge into a microwave oven or high-pressure container.
Doing so could cause the batteries to break, generate heat, rupture or burn.
 Avoid dropping the battery cartridge or letting it undergo any shock or impact.
Doing so could cause the batteries to break, generate heat, rupture or burn.
 Never charge the rechargeable battery cartridge where any inflammable gases may be emitted; doing
so could cause fire.
 Only use the dedicated charger for charging the rechargeable battery cartridge.
Using a different type of charger could cause battery-rupture or leakage of battery fluid and result in a
fire, bodily injury, or serious damage to property.
Handling the BHT
 The BHT uses a laser light for indicating the scanning range. The intensity of the laser light might be too
low to inflict bodily injury.
However, do not stare into the laser light.
The BHT complies with IEC 60825-1:1993+A2:2001.
In accordance with Clause 5, IEC 60825-1, the following information is provided to the user:
DO NOT STARE INTO BEAM OR VIEW
DIRECTLY WITH OPTICAL INSTRUMENTS
CLASS 2M LASER PRODUCT
Caution - Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous laser light exposure.
 Never put the BHT into a microwave oven or high-pressure container.
Doing so could cause the BHT to break, generate heat, rupture or burn.
LASER RADIATION
Barcode Handy Terminal
Reading window
(Laser light emission window)
viii