Denso BHT-500B User Manual page 153

BHT-500B
8.
Press the ENT key or press and hold the BS/C key to return to the SET RF PARAMET
menu.

Wireless Parameter Initializa
1.
Select "3: INITIALIZE" at the SET RF PARAMETER menu a
press the ENT key
T he screen on the right displays.
T o initialize wireless parameters:
U se the cursor keys ([▲] [▼]) or numerical key ([1]) to highlight [1: Yes]
and then press the ENT key.
Wireless parameters are initialized and the screen returns to the SET RF
PARAMETER menu.
T o cancel:
Use the cursor keys ([▲] [ ]) or numerical key ([2
then press the ENT key.
The screen returns to the SET RF PARAMETER menu.

EAP Authentication Option Setting
This setting can be used when the mode is set to other than "1: None" at the SET SECURITY
menu.
1.
Press the SF key and dot key at the SET RF PARAMETER menu.
The screen on the right displays.
[1: EAP START]: EAP authentication start time
[2: authPeriod]:
[3: helpPeriod]:
[4: startPeriod]:
[5: maxStart]:
2.
Use the cursor keys ([▲] [▼]) o
h ighlight the item to be set and press the ENT key.
The mode changes to entry mode and the cursor displays.
3.
Enter eac h item with the numerical keys and press the ENT key.
To delete a single characte
Press and hold the BS/C
4.
Press and hold the BS/C key to return to the the SET RF PARAMETER me
136
tion
.
▼
Retry interval when there is no response
Retry interval when authentication fails
Start retry interval
Start retry count
r numerical keys ([1] [2] [3] [4] [5]) to
r, press the BS/C key.
key to delete all entries made.
nd then
]) to highlight [2: No] and
ER
MODE
nu.