Safety Devices - MCZ Polar Installation And Use Manual

PROGRAMME 4 (7:30 a.m. - 10:30 p.m. Saturday and
Sunday)
DESCRIPTION
Programme 4: stove lighting time 7:30 a.m. (hot at 8:00 a.m.)
Programme 4: stove shutdown time 10:30 p.m. (cold at 11:00
p.m.)
Programme 4: inactive day Monday
Programme 4: inactive day Monday
Programme 4: inactive day Tuesday
Programme 4: inactive day Tuesday
Programme 4: inactive day Wednesday
Programme 4: inactive day Wednesday
Programme 4: inactive day Thursday
Programme 4: inactive day Thursday
Programme 4: inactive day Friday
Programme 4: inactive day Friday
Programme 4: Active day Saturday
Programme 4: Active day Saturday
Programme 4: Active day Sunday
Programme 4: Active day Sunday
Programme 4: CONFIRM
If a programme is not used, all days of the week relating to that programme must
be set to "OFF"
DESCRIPTION
Programme 4: stove lighting time - NOT USED
Programme 4: stove shutdown time - NOT USED
Programme 4: inactive day Monday
Programme 4: inactive day Monday
Programme 4: inactive day Tuesday
Programme 4: inactive day Tuesday
Programme 4: inactive day Wednesday
Programme 4: inactive day Wednesday
Programme 4: inactive day Thursday
Programme 4: inactive day Thursday
Programme 4: inactive day Friday
Programme 4: inactive day Friday
Programme 4: inactive day Saturday
Programme 4: inactive day Saturday
Programme 4: inactive day Sunday
Programme 4: inactive day Sunday
Programme 4: CONFIRM

4.12. SAFETY DEVICES

The stove is fitted with the following safety devices:
• PRESSURE SWITCH
Monitors pressure in the smoke duct. It is designed to shut down
the pellet feed screw in the event of an obstructed flue or
significant back-pressure (from the wind).
• SMOKE TEMPERATURE SENSOR
Monitors the temperature of the smoke, and gives permission for
startup or shuts the stove down when the smoke temperature falls
below the preset value.
• BULB TEMPERATURE PROBE OR CONTACT THERMOSTAT IN
THE FUEL HOPPER (KLIXON)
If the temperature exceeds the preset safety level, it immediately
shuts down the running of the stove, and has to be reset manually
before the stove will restart
Operation
PELLET STOVES
INSTALLATION AND USE MANUAL
ACTIVATION
Button 1 or Button 2
Button 1 or Button 2
Button 2
Button 1
Button 2
Button 1
Button 2
Button 1
Button 2
Button 1
Button 2
Button 1
Button 2
Button 1
Button 2
Button 1
ACTIVATION
Button 2
Button 1
Button 2
Button 1
Button 2
Button 1
Button 2
Button 1
Button 2
Button 1
Button 2
Button 1
Button 2
Button 1
(see paragraph 4.20.3)
.
STEP DISPLAY
UT 05 7 : 30
UT 06 22 :30
UT 07 ON 1 or OFF 1
UT 07 OFF 1
UT 07 ON 2 or OFF 2
UT 07 OFF 2
UT 07 ON 3 or OFF 3
UT 07 OFF 3
UT 07 ON 4 or OFF 4
UT 07 OFF 4
UT 07 ON 5 or OFF 5
UT 07 OFF 5
UT 07 ON 6 or OFF 6
UT 07 ON 6
UT 07 ON 7 or OFF 7
UT 07 ON 7
UT 08
STEP DISPLAY
UT .. ANY
UT .. ANY
UT .. ON 1 or OFF 1
UT .. OFF 1
UT .. ON 2 or OFF 2
UT .. OFF 2
UT .. ON 3 or OFF 3
UT .. OFF 3
UT .. ON 4 or OFF 4
UT .. OFF 4
UT .. ON 5 or OFF 5
UT .. OFF 5
UT .. ON 6 or OFF 6
UT .. OFF 6
UT .. ON 7 or OFF 7
UT .. OFF 7
UT ..
Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited
Chapter 4
49
page
CONFIRMATION
Button 3
Button 3
Button 3
CONFIRMATION
Button 3
Button 3
Button 3