Activation /De-Activation Of Eco-Stop Mode; Programmed Mode (With Timer); Operation To Be Carried Out By The Installer; Start Day (Code On Display Ut 01) - MCZ Polar Installation And Use Manual

STOVE BEHAVIOUR WITH TIME ACTIVE:
Timer intervenes
Stove status
ECO STOP Shut down the stove
ECO STOP

Activation /de-activation of ECO-STOP mode

4.10.3.1.

4.10.3.2. OPERATION TO BE CARRIED OUT BY THE INSTALLER

• Press the main switch on the back of the stove and place it in the
position "I". The display of the control panel will show the message
OFF/CURRENT TIME
• Press the button
control panel. The display of the control panel will show the
message UT01/OFF
• Press the button
UT16";
" the display of the control panel shows UT16/OFF
• Press and hold the button
"UT19"
to item ; the display will show the message UT19/OFF
• Press the button
to change the time of intervention of the ECO-STOP mode. The
display of the panel will show the message UT19/OFF or UT19/1',
UT19/2', UT19/3'.......... UT19/30'
• Press the button
shows the message OFF/CURRENT TIME

4.10.4. Programmed mode (with timer)

This operating mode, shown by the indicator light (9) on the display,
lets you programme stove lighting or extinguishing on a weekly basis.
Normally, the POLAR and NOVA stoves have the PROGRAMMED
mode deactivated. (indicator light 9 is off)
The basic characteristics in PROGRAMMED mode are:
• Start day
• Clock
• Programme (4 daily programmes are available)
4.10.4.1.

Start day (code on display UT 01)

The current day is set first, and will act as a reference for the
programming sequence. This means you will need to ask yourself: what
day is it today?
Suppose that as you read this paragraph it is Friday. Using the table
Figure 8
shown here ( ), you will see that Friday corresponds to DAY 5.
You will need to assign the stove the starting day of DAY 5.
To set this value, press in sequence buttons
01"
will appear, alternating with the message "OFF". Now press once
on the button and you will see the message "DAY 7". You will
immediately note that the indicator light (9) of the display is on.
Operation
INSTALLATION AND USE MANUAL
to...
Shuts down permanently
Light the stove Remains in ECO STOP
immediately followed by the button
repeatedly until the display on the panel shows
and then press the button
or to activate or deactivate the function, or
for a few seconds to confirm until the panel
PELLET STOVES
The stove...
and turns OFF
status
on the
and go
"UT
and . The code
Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited
2
1 7°C
!
SET
63°C
1 6
(9)
Display
Italiano Deutsch Francais Espanol
LUN MON LUN
MAR DIE MAR
MER MIT MER
GIO DON JEU
VEN FRE VEN
SAB SAM SAM
DOM SON DIM
Figure 8 – Table of correspondence for days of
week
Chapter 4
43
page
3
5
4
TURBO
~
English
LUN MON
MAR TUE
MIE WED
JUE THR
VIE FRI
SAB SAT
DOM SUN