Athos Hydro Dimensions; Technical Characteristics - MCZ Polar Installation And Use Manual

3.1.5.

ATHOS HYDRO Dimensions

Ø48
3.1.6.

TECHNICAL CHARACTERISTICS

Technical specifications
Overall thermal power
Overall thermal power
Yield at maximum
Yield at minimum
Temperature of exhaust smoke at maximum
Temperature of exhaust smoke at minimum
CO at 13%O at minimum and maximum
²
CO at minimum and maximum
2
Mass of smoke at minimum and maximum
Minimum draught at maximum power
Minimum draught at minimum power
Hopper capacity
Fuel pellet type
Pellet consumption per hour
Operating time between re-fuelling
3
Heatable volume m
Combustion air inlet
Smoke outlet
Maximum absorbed electrical power
Power supply frequency and voltage
Net weight
Weight with packaging
*Data that may vary depending on the type of pellets used.
**Heatable volume based on demand of cal/h for m
Appliance suitable for installation in a shared flue.
Installation and assembly
INSTALLATION AND USE MANUAL
Ø80
198
364
Max.
Min.
3
40-35-30 (respectively 40-35-30 Kcal/h for m
PELLET STOVES
578
14.0 kW (12040 kcal/h) / 10.4 kW (8944 kcal/h)
4.0 kW (3440 kcal/h) / 1.4 kW (1204 kcal/h)
0.10 mbar – 10 Pa
Pellet diameter 6-8 mm. Length range 5-30 mm
Min ~ 0.8 kg/h *
At min~ 43 h *
301/40 – 344/35 – 401/30 **
External diameter 50 mm.
External diameter 80 mm.
Max 300 W – Med 120 W
Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited
Athos Hydro
91 %
94 %
190°C
90°C
0.045 — 0.017%
3.4% – 5.9%
8.3 – 16,7 g/sec
0.05 mbar – 5 Pa
52 litres
Max. ~ 3 kg/h *
At max. ~ 12 h *
230 Volts / 50 Hz
200 kg
210 kg
3
)
Chapter 3
21
page