MCZ Polar Installation And Use Manual page 22

Technical characteristics
Overall thermal power (total/water) Max.
Overall thermal power (total/water) Min.
Yield at maximum
Yield at minimum
Temperature of exhaust smoke at maximum
Temperature of exhaust smoke at minimum
CO at 13%O at minimum and maximum
²
CO at minimum and maximum
2
Mass of smoke at minimum and maximum
Minimum draught at maximum power
Minimum draught at minimum power
Hopper capacity
Fuel pellet type
Pellet consumption per hour
Operating time between re-fuelling
3
Heatable volume m
Combustion air inlet
Smoke outlet
Maximum absorbed electrical power
Power supply frequency and voltage
Net weight
Weight with packaging
*Data that may vary depending on the type of pellets used.
**Heatable volume based on demand of cal/h for m
Appliance suitable for installation in a shared flue.
Installation and assembly
PELLET STOVES
INSTALLATION AND USE MANUAL
Polar Nova Athos Power Hydro
23.7 kw (20382 kcal/h) / 16.2 kw / 7.5 kw
6.2 kw (5332 kcal/h) / 3.7 kw / 2.5 kw
Pellet diameter 6-8 mm. Length range 5-30 mm
Min ~ 1 kg/h *
At min~ 33 h *
3
40-35-30 (respectively 40-35-30 Kcal/h for m
92 %
93 %
250°C
100°C
0.055 — 0.018%
5.5% – 11.9%
7.3 – 13 g/sec
0,10 mbar – 10 Pa
0,05 mbar – 5 Pa
52 lt
Max. ~ 5 kg/h *
At max. ~ 7 h *
510/40 – 582/35 – 679/30 **
Ø 50 mm.
Ø 80 mm.
Max 320 W – Med 120 W
230 Volt / 50 Hz
200 Kg.
210 Kg.
3
)
Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited
Chapter 3
22
page