Table of Contents
Advertisement
Hardness of water circulating in the system, to prevent
•
problems of incrustation and limescale, especially in the
domestic water heat exchanger. (> 25° French)
Installation of a water softener (if water hardness
•
exceeds 25° French)
Filling the system with treated water (demineralised).
•
Possibly providing an anti-condensation circuit.
•
Installation of plumbing bumpers to prevent banging
•
along the fittings and pipes.
If you have very extensive systems, with a large amount of water, or
which require frequent refilling, the installation of water softening
systems.
It
should
drastically reduce performance due to low thermal
conductivity.
3.5.
EXAMPLE INSTALLATION DIAGRAMS
The following diagrams are to be used only as a
guideline. For proper connection, always follow the
notes for the plumbing and heating installer. The
plumbing system must meet local, regional or
national requirements. Installation and verification
of operation is to be performed only by specialized,
authorized personnel.
MCZ will not be held liable for non-compliance with
the provisions listed above.
Installation and assembly
INSTALLATION AND USE MANUAL
be
remembered
that
PELLET STOVES
incrustations
Technical service - Rights reserved MCZ S.p.A. - Reproduction prohibited
Chapter 3
29
page
- Quick Links:
- Control Panel
Hide quick links:
Advertisement
Table of Contents
