Section 2
2.1
Graphical cycles support
Graphical cycle support in the program editor
The program editor in the control system provides you with programming
support to add cycle calls to the program and to enter parameters.
Function
The cycle support consists of three components:
•
Cycle selection
•
Input screenforms for parameter assignment
•
Help screen for each cycle (is to be found in the interactive screen-
form).
Once you have created an NC program, you can select a "graphical cycle
support either for "drilling" or "milling".
Here you can choose from
milling or drilling cycles.
Once you have chosen a cycle
here you can choose from the
SINUMERIK 802D sl Operating and Service Training Manual
Graphical cycles support
different types of cycles.
Page 2
Notes
C99
C99