Jog 1 Inc, 10 Inc, 100 Inc, 1000 Inc - Siemens SINUMERIK 802D Training Manual

Section 3

3.1 Jog 1 INC, 10 INC, 100 INC, 1000 INC

First put the control into JOG mode.
PRESS
Secondly
PRESS button once for 1 INC, Twice for 10 INC etc..
The following screen will be seen:
Active INC mode
Use the axis pushbutton for the required axis, and direction to be moved. When
pressed the chosen axis will move by 1 increment per press.
SINUMERIK 802D sl Operating and Service Training Manual
Jog 1 INC
is shown here
Page 3
Notes
C82
C82