C83
Brief description
1
Module objective:
Upon completion of this module you will understand workplane selection, and tool types for driven
tools on a turning machine.
Module description:
The tool offsets L1, L2 and L3 are assigned to the relevant axis with the workplane preparatory func-
tions (G codes). This module explains this relationship, which is important when using driven tools.
Module content:
•
•
SINUMERIK 802D sl Operating and Service Training Manual
Tools Turning / Milling functions
Workplane selection
Tool types for milling/drilling
Workplane selection
Tool types for milling/
drilling
Page 1
Section 2
Section 3
C83
C83