Led Diagnosis Hmi - Siemens SINUMERIK 802D Training Manual

C10
Brief description
1
Module objective:
Upon completion of this module you can locate the status LED's and determine the status of the CNC
controller
Module description:
The 802D SL controller has extensive diagnostic possibilities, one of which is the LED diagnostic on
the CNC Controller.
It is possible using the LED status to determine quickly the hardware status of the CNC controller.
Before investigating faults using external diagnostic tools (HMI alarm, Starter etc) a status should first
be taken of the controller LED's.
Module content:
•
•
SINUMERIK 802D sl Operating and Service Training Manual

LED Diagnosis HMI

Locating the Status LED's
Status of CNC Controller LED's
Locating the Status
LED's
Status of CNC Control-
ler LED's
Page 1
Section 2
Section 3
C10
C10