Example Drilling Program - Siemens SINUMERIK 802D Training Manual

Section 4
4.1

Example drilling program

G00 G90 G95 G40 G17
T1 D1
G95 S1500 M03 F0.15
G00 G54 X0.0 Y0.0 Z50.0
Z2.0
G01 Z-10.0
G04 F0.5
G00 Z2.0
X-50
G01 Z-10.0
G04 F0.5
G00 Z2.0
G00 G40 Z50.0
X0.0 Y200.0 Z200.0
M30
SINUMERIK 802D sl Operating and Service Training Manual
Example drilling program
;basic G-code commands
;call tool
;spindle speed in RPM feed MM/REV
;rapid to safe position start of contour
;rapid to safe position
;feed onto workpiece
;dwell at bottom of hole
;rapid out of hole
;coordinates for drilling
;feed onto workpiece
;dwell at bottom of hole
;rapid out of hole
;rapid to safe height
;safe tool change position
;end of program
Note: G95 are being
used in this contour
example
Page 9
Notes
C92
C92