C69
1. Description
Module objective:
Upon completion of this module you can switch on the machine and reference the axis.
Module description:
Before you can work with the machine, the control has to be switched on. Axis with incremental mea-
suring systems have to be referenced, so that the control knows where the axis are in the machine
coordinate system.
It is not necessary to reference axis which have an absolute measuring system.
Module content:
•
•
SINUMERIK 802D sl Operating and Service Training Manual
Power on and referencing
Switch on the control
Referencing the axis
Switch on the control
Referencing the axis
Page 1
Section 2
Section 3
C69
C69