Miscellaneous Functions; Program Stop (M00, M01) - Siemens SINUMERIK 802D Training Manual

Section 3
3.1

Miscellaneous functions

The miscellaneous functions M initiates switching operations, such as
"coolant ON/OFF" and other functions.
Various M functions have already been assigned to the CNC control, M
functions not already assigned to the CNC control are reserved for free
assignment by the machine tool manufacturer.

Program stop (M00, M01)

Function
When placed between axis movements, this command will stop the
NC program until the cycle start button is pressed again.
Programming
M00
M01
—————————————————————————————————
M01 is conditional, can be activated or deactivated in the "AUTO" page,
under softkey "program control" Then pressing softkey "Condit stop"
softkey "program control"
will allow you to select
softkey "Condit. stop" to
activate and deactivate M01
SINUMERIK 802D sl Operating and Service Training Manual
Miscellaneous functions
; unconditional stop (you must press cycle start)
; conditional stop
(softkey in Auto page "program control")
Page 4
Notes
C97
C97